| Catalog listing
|
FL7M-3T7HD-CN
FL7M-3T7HW(-CN, -CN03) |
FL7M-7T7HD-CN
FL7M-7T7HW(-CN, -CN03) |
FL7M-10T7W-CN
FL7M-10T7W(-CN, -CN03) |
| Actuation method
|
High-frequency
oscillation type (shielded) |
| Rated sensing
distance |
3±0.3mm |
7±0.7mm |
10  mm |
| Usable sensing
distance |
0 to 2.4mm |
0 to 5.6mm |
0 to 8mm |
| Standard target
object |
12 x 12mm, 1mm thick
iron |
18 x 18mm, 1mm thick
iron |
30 x 30mm, 1mm thick
iron |
| Differential
travel |
10% max. of
sensing distance |
| Rated supply
voltage |
100/200Vac,
50/60Hz 24Vdc |
| Operating voltage
range |
40 to 250Vac,20
to 250Vdc |
20 to 250Vac/dc |
| Leakage current
|
When AC power
supply is used: 2.0mA max. (100/200Vac), When DC power
supply is used: 1mA max. (24Vdc) |
| Control output
|
Switching
current: 5 to 100mA (at 30Vdc supply voltage: 5 to 20mA)
Voltage drop: When AC power supply is used 10V max., When
DC power supply is used 6V max.
Output dielectric strength: 250V (at both AC and DC power
supplies) |
| Operating frequency
|
When AC power supply
is used 25Hz
When DC power supply is used 1000Hz |
When AC power supply
is used 25Hz
When DC power supply is used 500Hz |
When AC power supply
is used 25Hz
When DC power supply is used 400Hz |
| Temperature
characteristics |
±10% max.
for the range of -25 to +70°C when +23°C is taken as standard
temperature in sensing distance |
| Operating temperature
range |
-25 to +70°C
|
| Storage temperature
range |
-40 to +85°C
|
| Insulation
resistance |
50M  min. (at 500Vdc) |
| Dielectric
strength |
4,000Vac,
50/60Hz for 1 minute |
| Vibration resistance
|
10 to 55Hz,
1.5mm peak-to-peak amplitude, 2 hrs in X, Y and Z directions
|
| Shock resistance
|
1000m/s2
10 times in X, Y and Z directions |
| Protection
|
IP67 (IEC
standard), IP67G (JEM standard) |
| Weight |
Approx. 110g
Main unit with 2m pre-leaded cable |
Approx. 140g
Main unit with 2m pre-leaded cable |
Approx. 240g
Main unit with 2m pre-leaded cable |
| Circuit protection
|
Surge absorption,
load short-circuit protection (at 20 to 30Vdc) |
| Wiring method
|
Connector,
pre-leaded connector, pre-leaded |
| Material |
Sensor |
Case |
Ni-plated
brass (W type: Ni-plated brass, fluorine resin coated)
|
| Sensing face |
PBT (W
type: fluorine resin) |
| Connector |
Housing |
-CN: Ni-plated
brass, -CN03: polyester elastomer |
| Holder |
Glass-lined
polyester resin |
| Contact |
Gold-plated
brass |
