| |
 |
 |
| Supply voltage |
12 to 24 V DC
± 10 % (ripple 10 % p-p max.) |
| Power consumption |
750 mW max. (current
consumption 30 mA at power supply voltage 24 V DC) |
| Scanning distance (at max.
sensitivity setting) |
Standard |
At use with HPF-T003:
800 mm |
| At use with HPF-D003:
300 mm |
| Ultra long distance |
At use with HPF-T003:
1,400 mm |
| At use with HPF-D002:
500 mm |
| High speed response |
At use with HPF-T003:
150 mm |
| At use with HPF-D002:
50 mm |
| Detection object |
Non-transparent object of more than 1 mm dia. (at
use with HPF-T003) |
| Standard detection object |
White paper (at
use with HPF-D002) |
| Hysteresis |
20 % max. (at
rated scanning distance) |
| Operation mode |
Light operated/dark
operated changeover (Settig by L-ON/D-ON changeover switch) |
| Output mode |
N-MOS FET open drain output |
P-MOS FET open drain output |
| Control output |
Switching current: 100 mA max. (resistive load), Output
dielectric strength: 26.4 V, Voltage drop: 2 V max. (at
switching current 100 mA), With power short-circuit protection
circuit |
| Response time |
Standard |
1 ms max. for
both operation and recovery |
| Ultra long distance |
5 ms max. for
both operation and recovery |
| High speed response |
120 µs
max. for operation and recovery |
| Delay |
Adjustable ON/OFF delay (1 ms to 1 s: 1 ms to 200
ms by 1 ms step, 200 ms to 1 s by 100 ms step) |
| One-shot output |
Adjustable ON/OFF (1 ms to 1 s: 1 ms to 200 ms by
1 ms step, 200 ms to 1 s by 100 ms step) |
| Light emitter |
Red LED |
| Digital indicator |
Incoming light level, setting status and contrast
indication |
| Display functions |
Operation indicator, mode indication (RUN, SET, TMR
and ADJ) |
| Ambient light immunity |
Incandescent lamp: 3,000 lx max., Sunlight: 10,000
lx max. |
| Oeprating temperature range |
-20 to +55 °C
(See note) |
| Storage temperature range |
-40 to +70 °C |
| Humidity range |
35 to 85 % RH
(no condensation allowed) |
| Insulation resistance |
20 Mohms min.
(at 500 V DC) |
| Dielectric strength |
1,000 V AC 50/60
Hz for one min. between electrically live metals and case |
| Vibration resistance |
10 to 55 Hz,
1.5 mm peak-to-peak amplitude, for 2 hrs. in each of X,
Y and Z directions |
| Shock resistance |
500 m/s2,
3 times in each of X, Y and Z directions |
| Weight |
Approx. 65 g
(body only with 2 m cable) |
| Others |
Output is disabled
during Power On (approx. 200 msec), Output reverse connection
protection circuit |
