search »
» About us
» Integrated Solutions
» Sensor
» Switches
» Process Products
» VIP Access
» Document Download

Get Adobe Acrobat Reader

In order to view PDF documents, you need Adobe Acrobat Reader version 4.0 or later, available for free download from Adobe Systems (click icon to access the web site).

HPX Series

Features:
800 mm long scanning distance (with HPF-T001 fiber)
50 µsec quick-response detection and mark detection types available
Low profile (10 mm); one-touch attachment to DIN rail
Free-cut optical fiber attachment/detachment with snap-action lever
Cable adapter for small-diameter cables
Self-diagnostic LEDs plus self-diagnostic output
Fine tuning of sensitivity using multi-turn potentiometer with indicator
PNP output types available as standard

 
Basic Specs
 
Model High sensitivity Low hysteresis Fast response Mark detection
Catalog listing HPX-H HPX-A HPX-F HPX-V
Supply voltage 10 to 30Vdc (Ripple 10% max.)
Current consumption Max. 35mA
Operating mode Light operated/Dark operated, switch selectable
Output form NPN or PNP transistor open collector
Control output Output switching current: Max. 100mA (resistive load), output dielectric strength: Max. 30V, residual voltage: Max. 1V (at 100mA switching current), with output short-circuit protection circuit
Self-diagnostic output Output switching current: Max. 50mA (resistive load), output dielectric strength: Max. 30V, residual voltage: Max. 1V (at 50mA switching current), with output short-circuit protection circuit
Response time Max. 500µs for operation and recovery Max. 50µs for operation, Max. 70µs for reset Max. 500µs for operation and reset
Sensitivity adjustment 3-turn potentiometer with indicator
Light Emitter Red LED Green LED
Indicator Light-operated (LO) indicator: Red (ON during LO), Stability indicator: Green (ON during stable LO or DO (dark-operated): blinking during self-diagnostics)
Timer function OFF delay 40ms/instantaneous switch selectable
Ambient light immunity Incandescent Lamp:Max.5,000lx,Sunlight:Max.20,000lx
Operating temperature range -20 to +60°C (for gang mounting, max. operating temperature is 50°C)
Storage temperature range -40 to +70°C
Humidity range 35 to 85%RH (non-condensing)
Insulation resistance Min. 20M(500Vdc megger)
Dielectric strength 1,000Vac 50/60Hz for 1 min. between case and all electrically live metals
Vibration 10 to 55Hz, 1.5mm peak-to-peak amplitude, 2 hours each in X, Y, and Z directions
Shock 500m/s2 repeated 3 times in X, Y, and Z directions
Wiring method Pre-leaded
Weight About 55g (body only, with 2 m cable)
Others Equipped with a reverse connection protection circuit and power on/off malfunction prevention circuit (about 100ms)
Installation Instructions No.: CP-UM-3099E

Address: 3323 Kifer Rd.; Santa Clara, CA; 95051 Phone: 1-866-SENSOR1 Fax: 1-602-216-8211
---------------------------------------------------------------------------------------------------------------------------------------------------------
Yamatake Sensing Control, Limited. © Copyright 2007 Terms and Conditions | Privacy Policy
Powered by: Lan Services